Boker Tech Tool Scales in various Composite Materials

Boker Tech Tool 1/2/3/4 Scales in Composite Materials,

(Photos to Follow)

A set of replacement scales for the trusty Boker Tech Tool 1/2/3/4 in Carbon Fibre, Micarta, Ultem 100

Cnc cut & hand finished to achieve a perfect fit and feel,

Tech tool 2/3/4 will have the cut out for the cork screw,

Will be supplied with Belt clip holes as a selectable Option,

Available with a flat face in 3.2mm & 5mm with either a flat ground edge, chamfered edge or round over edge

or

Curved face in 3.2mm & 5mm as original, (no need to select side profile), (not available in Ultem 100),

Available with a selection of finishes

Mill finish, straight off the Cnc with all sharp edges removed ready for self finishing,

Dressed Finish, All surfaces faced off to remove any blemishes or tool marks and finished off with a fine scotch pad,

Lightly Polished, Same as Dressed but finished off with a polishing wheel to add a sparkle, ( I do not attempt a mirror polish as it would be easy to damage in transit),

2k Clear coat Acrylic finish, (not available in Ultem 100),

Available with a selection of side profile finishes

Side profile flat ground,

Side profile with a 1mm Chamfer,

Side profile with a 2mm Round over,

Uses existing hardware so no fittings supplied,

This item is designed for self installation.