UKPK V2 Flat Scales (Stabilised Hard Woods)

A set of replacement Flat scales to fit the Spyderco UKPK ( 3 Pin 1/2 spring and 4 Pin Full Spring Versions ) in a variety of stabilised hard woods (Stabilisation Colours as an option).

Cnc cut & hand finished to achieve a perfect fit and feel,

These are my newly designed V2 Scales that incorporate 3mm or 5mm Scales with the option of Flat ground edges, 1mm x 45 degree chamfer or round over edges.

Available finishes :-

Some woods take colour well like Maple and Oak where as others like Namibian Rose wood, Purpleheart and Walnut do not take colour very well at all, When choosing a colour try to avoid these woods and stick to natural colours.

• Mill Finish ( straight off the mill with edges de-burred and ground flat but no surface dressing).
• Light polish (Sanded to 500 grit then Buffed with wax).
• 2K Clear Gloss (Sanded to 1000 Grit then coated with a 2K clear gloss acrylic topcoat)

Uses existing hardware and is supplied with 2x 0.25mm phosphor bronze washers and a Concentric Cam for easy spring adjustment ( Cam is for the 3 pin half spring version only) .

( Concentric Cam adjuster (3 pin half spring version) and Phosphor bronze washers )

The screw holes are D shaped to take the D shaped barrel pins.

Will be supplied with Belt clip pocket on the right side (as std) or without (Via the options panel), there is also an option for single sided left or right.

Blade shown for reference (not supplied).

This item is designed for self installation.